.:`=-~rANdOm~`-=:. Game Servers
Technology (Read Only) => Computers => Topic started by: saivon on July 27, 2013, 05:12:41 PM
-
Whenever my pc boots up on the bios it says my ram is in unengaged mode what does that mean?
-
I think you mean unganged.
What I found.
It is amd's version of Nvidia's Locked vs unlocked architecture.
basically allowing you to use your ram in dual channel vs single channel.
Ganged = dual channel mode for ram. All cores get access to 100% of the ram.
unganged = single channel. Each core gets access to a stick of ram.
In theory, the unganged mode is better as each core will get access to data quicker. In theory.
http://www.overclock.net/t/324052/ganged-vs-unganged-mode#post3768700 (http://www.overclock.net/t/324052/ganged-vs-unganged-mode#post3768700)
-
Alright that makes sense now I just need to find 8gbs at least of ram but how would I know what ram is good and what's not?
-
look at the ram that is in your computer and get the same type, it'll say like DDR3-1333 or something
-
Before ya do anything, how many physical sticks of ram do you have?
-
2 sticks and It's DDR3 so should I get ram that's DDR3 right?
-
2 sticks and It's DDR3 so should I get ram that's DDR3 right?
indeedi, get the same type of ram
-
indeedi, get the same type of ram
So just get DDR3 ram does not even have to look the same as my ram right?
-
So just get DDR3 ram does not even have to look the same as my ram right?
Yes, but it should be the same speed (for example, 1333mhz should be paired with 1333mhz). This isn't required, but your RAM will be only as fast as the slowest DIMM.
To prevent problems, you should generally get the same type of RAM you already have. If that's not possible, try to get RAM that's the same speed, timing, latency and voltage as the stick you already have.
-
So how would I figure out the speed voltage etc. On my ram?
-
it shows what speed it's running under the bios, and you can figure out what line of ram it is by looking at the heatsink if there is one.
-
Thing is, it should run paired with even 2 sticks.
If you motherboard has 4 slots, make sure the sticks are in either;
In the same color slots,
Read the manual to see what is the configuration,
Or Try different combinations yourself.
-
it shows what speed it's running under the bios, and you can figure out what line of ram it is by looking at the heatsink if there is one.
How would I get my bios open?
-
How would I get my bios open?
You won't need to open your BIOS. Just download this (http://ftp://ftp.cpuid.com/cpu-z/cpu-z_1.65-en.zip), open cpuz_x32, and click on the Memory tab in the window that appears.
Under Timing, DRAM Frequency is the speed of the RAM. FSB:DRAM...ignore that. The timings are the next four values. If it appears as (for example):
9.0 clocks
9 clocks
9 clocks
24 clocks
Your RAM timing is 9-9-9-24.
Go to the SPD tab, and on the bottom (just above the buttoms) should be a column labelled Voltage. This is your RAM voltage.
-
Lock thread please bombsqaud is a genius and helped me